Conveyor Trolley Yoke Cleaning Brush
Model #30Y for 3″ I-Beam
Model #40Y for 4″ & 6″ I-Beam
The channel sweeps are designed to remove dirt and debris from the internal conveyor track surfaces. This improves grounding and helps reduce part rejects. These brush assemblies are easily installed by replacing a single chain link. We recommend installing one channel cleaner every 250 feet of chain.
RW91 Replacement brushes
Brass 91312RB
Stainless Steel 91316RB
The channel sweeps are designed to remove dirt and debris from the internal conveyor track surfaces. This improves grounding and helps reduce part rejects. These brush assemblies are easily installed by replacing a single chain link. We recommend installing one channel cleaner every 250 feet of chain.
UN91 Replacement Brushes
Brass 91302RB
Stainless Steel 913BRTB
These conveyor cleaning brush assemblies remove dirt and debris from enclosed track conveyor chains. The units come pre-mounted on a modified rail section.
Replacement brushes for 8075-B
Crimped Carbon Steel
Top – 75RB (1)
Sides – 50RB (4)
These conveyor cleaning brush assemblies remove dirt and debris from enclosed track conveyor chains. The units come pre-mounted on a modified rail section.
Replacement brushes for 8074-B
Crimped Carbon Steel
Top – 75RB (1)
Sides – 50RB (4)
Cleaning the chain and bearing surfaces will help eliminate part rejects, prolong the life of your chain, achieve better grounding, increase the performance of your line, and improve lubricant effectiveness! Mighty Lube offers Beam Sweep Brushes in 3″, 4″, and 6” sizes. Ease of installation and removal makes replacing brushes a quick operation, keeping downtime to a minimum. Not only will the removal of debris and accumulated deposits greatly reduce or even eliminate reject parts, but it allows the lubrication system to perform more efficiently, reducing contamination by lubricant as well as debris.
Model #3-91BC for 3″ I-Beam
Model #4-91BC for 4″ I-Beam
Model #6-91BC for 6″ I-Beam
Replacement brushes for #3-91BC
Stainless Steel
Sides – #913BRS (2)
Top/Bottom – #913BRTB (4)
Replacement brushes for #4-91BC
Stainless Steel
Sides – #914BRS (2)
Top/Bottom – #914BRTB (4)
Replacement brushes for #6-91BC
Stainless Steel
Sides – #916BRS (2)
Top/Bottom – #916BRTB (4)
Download Model 3-91BC Instructions
The I-beam yoke cleaning brush removes buildup from hard to reach, often overlooked sources of contamination. Install by welding the mounting block to the bottom of your conveyor rail.
Model #30Y for 3″ I-Beam
Model #40Y for 4″ & 6″ I-Beam
Replacement brushes for #30Y
Stainless Steel
#30RB (1)
Replacement brushes for #40Y
Stainless Steel
#40RB (1)
These I-beam chain and trolley cleaners are easy to install. The brush clamps on top of I-beam and there is no welding required.
Chain & Trolley Brush Cleaner With Crimped Steel Brushes
Model #300-I for 3″ I-Beam
Model #400-I for 4″ I-Beam
Model #600-I for 6″ I-Beam
Chain & Trolley Brush Cleaner With Long-Life, Carbide-Impregnated Nylon Brushes
Model #300-INB for 3″ I-Beam
Model #400-INB for 4″ I-Beam
Model #600-INB for 6″ I-Beam
Replacement brushes for #300-I, #400-I, #600-I
Crimped Carbon Steel
#75RB (20)
Replacement brushes for #300-INB, #400-INB, #600-INB
Long-Life, Carbide-Impregnated Nylon Brushes
#75NRB (20)
This is also known as the part saver brush because it prevents contamination of parts by lubricant overspray. This brush assembly mounts on the conveyor at the location of the lubricator.
Model 800QCB
Available for most conveyor types
800QCB Replacement Brushes
91006RB (2)