|
Mighty Lube Products |
Conveyor Lubrication Systems (Single Line)
Available for Enclosed Track, I-Beam, Power and Free and other conveyor types.
Avoid costly chain replacement and plant downtime. Our Mighty Lube Single Line Conveyor Lubrication Systems properly lubricate a conveyor chains and open trolley bearings, extending the conveyor’s life and increasing manufacturing efficiency. And unlike some lubrication methods in use today, Mighty Lube automatic Conveyor Lubricators place a precise shot of lubricant at each lubrication point, eliminating waste and droplets.
- Available for most conveyor configurations
- An ideal solution and excellent value for customers with a medium number of conveyors
- Requires no plant air for operation
- Economical to operate
- Easy to install: Simply weld the supplied modified rail/track section into the existing rail/track, hook up the power, and begin lubricating!
Lubricator Equipment Add-On Options:
- Chain Wear Monitor
Provides on-demand chain pin wear for each link - Remote Fill System
Eliminates the need to climb a ladder in cases where the conveyor is high above floor level - Power supplies for other operating voltages
Patented Microprocessor Controls make operation for Mighty Lube conveyor lubrication systems as easy as pushing a button. The simple step-by-step menu can be programmed easily, with no complicated readouts or switches to set.
Each Mighty Lube Self-Contained conveyor lubricator is engineered to include:
- 5.5 gallon capacity heavy duty steel reservoir with solvent-resistant finish
- Lubricant level gauge
- Low level audio alarm
- Programmable microprocessor controller includes:
– Easy to use keypad
– Password access for authorized users
– LCD display showing current conveyor chain link, chain speed, and programmed values
– Adjustable parameters include lubricant cycles, lubricant shot volume, chain link number, and chain pitch
– Additional inputs to control other lubrication points, other lubricators, and automatic greasers for sealed trolley wheels - During lubrication cycles, lubricant pump is activated by conveyor power chain motion
- Memory circuit to automatically resume if power is interrupted
- Extended range proximity sensor to detect lubrication points
- Premounted on a modified section of rail/track ready to be welded into place
- Operating voltage – 120VAC, 60 Hz
Model #2100L
For Richards-Wilcox Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
Model #2101L
For Unibilt or Rapid Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
Model #2102L
For Double Vertical Bearing Chain Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Single and Double Vertical Bearings
Model #2110L
For Round Tube Overhead Conveyors
Lubricates: Chain Pivots, Horizontal Bearings and Vertical Bearings
For all MODEL #2010L Units: Customer Must Supply a 30″ Rail Section for Pre-Mounting
Units are also available for most other conveyor manufacturers.
Model #2103L
3″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings
Model #2104L
4″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings
Model #2106L
6″ Monorail Overhead Conveyor Lubricator
Lubricates: Chain Pins and Trolley Bearings
Units are also available for most other conveyor manufacturers.
Model #2105L
Power and Free Conveyor Lubricator For Richards-Wilcox Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier
Model #2107L
Power and Free Conveyor Lubricator For Unibilt or Rapid Conveyors
Lubricates: Chain Pivots and Horizontal/Vertical Bearings on power chain, Load Bearings and Guide Rollers on the Free Carrier
Model #2108L
Power and Free Conveyor Lubricator For 3″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier
Model #2109L
Power and Free Conveyor Lubricator For 4″ I-Beam
Lubricates: Chain Pins and Trolley Bearings on the Power Chain, Load Bearings and Guide Rollers on the Free Carrier
NOTE: For all power & free units the customer must supply a rail section with at least 36″ between the yokes for pre-mounting.
